Intake Manifold Gasket

Ford Mustang 4.6L PI Intake Manifold Installation Parts Kit #1

Ford Mustang 4.6L PI Intake Manifold Installation Parts Kit #1
Ford Mustang 4.6L PI Intake Manifold Installation Parts Kit #1
Ford Mustang 4.6L PI Intake Manifold Installation Parts Kit #1
Ford Mustang 4.6L PI Intake Manifold Installation Parts Kit #1

Ford Mustang 4.6L PI Intake Manifold Installation Parts Kit #1

4.6L Ford Mustang PI Intake Manifold Installation Parts Kit #1. Please place your order accordingly. More on the way with a short delay... Contact me for an update.

More kits also on the way. If you need this kit you can contact me for an update.

We can expedite this for you... I posted some actual photos from one of our recent sales to show the new configuration and new gaskets and o-rings.

Contact me if you have any questions. If necessary, contact me for an ETA. The L and R intake gasket set is taken from our MS-921213 set that we have in another listing.

Contact me if you need to make any modifications to the parts included in this kit. Update: Do you want to add a thermostat kit? Ignore the listed parts pictures as there are now slight variances to this kit. Just to reiterate, all kits are configured with quality FelPro intake gaskets & Mahle water pump gasket, not the Ford intake gaskets. Included intake gaskets are shown in picture #2.

We can upgrade to the OEM Ford gaskets for an additional charge. Usually about a week out. See the full list of the included parts with this kit below. Again, this kit is now configured with the Fel-Pro intake gasket set. We can provide the kit with OEM Ford intake gaskets by request & with a price adjustment.

Also, additional kits are available depending on your needs. See my other listings or contact me for more details & assistance. Again, this kit now includes the Fel-Pro MS 92121-3 - Ford 4.6L 2V SOHC 3PC PI engine intake manifold gasket set. Happy to help if possible. Kits in stock but inventory can change quickly. More on the way in approximately 5-7 days.

Kit does not currently come with the alternator upper bracket so you will need to source that part separately. It is not the generic multi-use bracket included with some of the aftermarket kit.

I will check on the availability and will post a picture of the bracket soon. Please request an update if you are interested in this bracket. Also, for upgrade options, we have additional kits available with different parts configurations at a lower cost. The only parts included in this kit are the following items. PI intake manifold gaskets- Fel-Pro kit mentioned above (L&R).

Water pump O-Ring - OEM Mahle. Heater Core PI type Lower Coolant Tube - OEM FORD. Water pump nipple - New Style, OEM FORD. 16 piece set of high quality fuel injector o-rings. Contact me for more info. Please note that all of the above items are available separately as well Just contact me. Contact me for more details, part numbers, etc. Use the make-offer option to tailor your kit depending on what you would like. Here is an example of some options. Good option if you have your intake gaskets. Other options available as well depending on kit contents. You can use the make-offer option if you want to exclude one or more of the items in the kit to save some more cash.

As an example sometimes this kit is requested without the intake gaskets or the fuel injector o-rings. Let me know if you want to leave certain parts out of this kit and I can let you know how much extra savings that could be.

This Kit includes many of the parts necessary to install the new style PI intake manifold on your 96-98 Mustang 2V SOHC Mustang GT. Kit can be modified to fit other 2V 4.6L Fords such as the Crown Vic (by request) just contact me for details & read all details below to see the parts that are included in the base kit. This kit has been created by customer requests. Any questions just let me know.

I'm happy to assist. Look, now includes HQ Felpro Intake gaskets.

Update to the kit: This kit now includes a complete set of 16 fuel injector replacement O-Rings! This is very important to change the o-rings while your installing a new intake manifold.

This also is the perfect time to do so. The factory o-rings are normally pretty hard from age and heat and also pretty built-up on the topside from road debris & grime. This will help provide piece of mind for your completed job. You would not want to discover a fuel leak after all your hard work. Also if these o-rings are not wanted or needed they can be pulled from the kit and a discount applied to the total.

Please advise me before you pay so I can adjust your total and re-invoice. Contact me for more information on this. I included some pictures of the o-rings. Some are black, some brown but they are all very high quality injector replacement o-rings.

You will get 16 of them for an 8 cylinder (2 used per each injector). I don't want any surprises for either of us.

Sometimes we may have trouble with one or more parts in the kit if there is a supply issue from Ford. This seems to happen occasionally, especially with the intake gaskets lately. Sometimes the delay can be up to 6-14 days and is just a few extra days right now.

Update, Please Read : May be just a little delay on this kit, we are working on locating some of the alternator mounting brackets which are now discontinued. Just contact me to confirm.

Thanks for your understanding and patience. Complete kits in stock with some more in just a few more days (5-7+ days)... I will update the status accordingly if we sellout of this kit.

Your cooperation is much appreciated. Sorry for the price increases.

Ford just seems to keep going up on these parts with a new jump on the alt bracket. The necessary parts to install the newer PI intake on your 96-98 Mustang or other Ford 4.6L powered vehicles.

The upgraded PI manifold has been shown to increase power to your existing engine without the need to swap the PI heads. This installation has been dyno proven to provide 15-20 additional HP! Included in this kit are many of the necessary parts needed to perform the install.

You will need additional parts to do the complete install so please contact me if you are unsure what you will need. There are many documented installation overviews on the internet. If you need a link to this just contact me. PI intake manifold gaskets (L&R).

16 replacement fuel injector o-rings. Additional parts for the upgrade are available separately. Here is some more information on this. Contact me for more information to see if we can still obtain this part from Ford.

This intake has the new style aluminum crossover tube. If your engine has the original design with the full plastic crossover tube it is just a matter of time before you start to have trouble with it.

Ford remedied the problem and changed to this new design after 2001 but they had used the all plastic non PI intakes from the early 90's and PI intakes from 99-01, so there are many out there waiting to fail. We also carry the non-PI replacement intake manifolds in another listing. If you want a non PI intake with the redesigned aluminum crossover tube just contact me. There are also many articles on the web that documents using the new PI intake with the older non-PI heads for a 15-20 HP boost! Generally if you need the intake there will be a delay.

They are available to our local sales and sometimes may sell out but we get new deliveries in weekly. If this is a problem you may want to contact me before you order. We may also still carry the manifold in another listing.

It is a Ford Racing Part! Info on this part is below. Current production plastic intake manifold used on 2001-04 4.6L SOHC 2V Mustang GT. Less expensive alternative to aftermarket performance intake manifolds for PI head swaps. Manifold fits 1999-04 Power Improvement head ports. Great for custom engine builds. Can be used on 1996-98 engines with Performance Improvement (PI) heads. Additional modifications and parts required. Check out my other items. Be sure to add me to your favorites list. Sorry for the price increase, due to Ford parts price increases.

They probably are doing this because they are having so much trouble lately. Manifold availability is now very limited and on an "order as needed basis" part.

Due to the recent Ford pricing increases for parts in this kit including the Ford Racing intake manifold, just contact me for the current pricing if interested in both items. Please let me know if you have any questions.

This price may change so please check with me to verify current pricing and availability. The item "Ford Mustang 4.6L PI Intake Manifold Installation Parts Kit #1" is in sale since Friday, March 27, 2009.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Intake Manifold". The seller is "parts_plus_more" and is located in East Coast.

This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Viet nam.

  • Placement on Vehicle: Left & Right
  • Surface Finish: Various
  • Part Brand: OEM Ford & Felpro
  • Modified Item: No
  • Custom Bundle: No
  • Interchange Part Number: XR3Z-18B402-AA
  • Type: Manifold installation kit
  • Manufacturer Part Number: Does Not Apply
  • Engine Size: 4.6L/281
  • Other Part Number: 92121 Felpro intake gaskets
  • Brand: Ford
  • Fitment Type: Performance/Custom
  • Non-Domestic Product: No

Ford Mustang 4.6L PI Intake Manifold Installation Parts Kit #1